GDL objects

more info...

ArchiGREEN-SolarPanel

Compatible with ArchiCAD 12 and later.

An arrayable solar panel based on popular manufacturers specifications.

Parameters include:

2D and 3D graphically sizeable ("stretchy")
Unit dimensions (width, height, thickness, trim)
No. of cells within each panel unit
No. of panels in array (horizontally and vertically)
Panel slope (@ base and @ side)
Spacing between panels
Roof slope (°, %, pitch /12", pitch /12')
2D/3D detail level
Floor plan display modes (symbolic and follow cut plane)
Misc. 2D/3D appearance parameters
Misc. materials
LEED information for listing and calculations
ArchiCAD standard listing parameters

more info...

ArchiGREEN-WindPower

Compatible with ArchiCAD 12 and later.

A customizable single propeller-style wind powered generator based on popular manufacturers specifications.

Parameters include:

2D and 3D graphically sizeable ("stretchy")
Misc. dimensions (width, depth, height, propeller)
No. of blades
Pole mount toggle
2D/3D detail level
Floor plan display modes (symbolic and follow cut plane)
Misc. 2D/3D appearance parameters
Misc. materials
LEED information for listing and calculations
ArchiCAD standard listing parameters

more info...

ArchiGREEN-RainWaterCistern

Compatible with ArchiCAD 12 and later.

A customizable above-ground and below-ground rain water collection cistern.

Parameters include:

2D and 3D graphically sizeable ("stretchy")
Type (above or below ground)
Tank shape (multiple shapes and sizes)
Misc. dimensions (width, height, thickness, trim)
MEP connection parameters (for MEP add-on)
2D/3D detail level
Floor plan display modes (symbolic and follow cut plane)
Misc. 2D/3D appearance parameters
Misc. materials
LEED information for listing and calculations
ArchiCAD standard listing parameters

more info...

ArchiGREEN-BikeRack

Compatible with ArchiCAD 12 and later.

A customizable popular "wave" style bicycle rack.

Parameters include:

2D and 3D graphically sizeable ("stretchy")
Misc. dimensions (length, height, thickness, clearance)
Spacing dimension
No. of spaces (manual input or calculated)
2D/3D detail level
Floor plan display modes (symbolic and follow cut plane)
Misc. 2D/3D appearance parameters
Material
LEED information for listing and calculations
ArchiCAD standard listing parameters

more info...

ArchiGREEN-TanklessWH

Compatible with ArchiCAD 12 and later.

A customizable tankless water heater based on popular manufacturers specifications.

Parameters include:

Type (electric, natural gas, propane)
Misc. dimensions (width, depth, height)
MEP connection parameters (for MEP add-on)
2D/3D detail level
Floor plan display modes (symbolic and follow cut plane)
Misc. 2D/3D appearance parameters
Misc. materials
LEED information for listing and calculations
ArchiCAD standard listing parameters

more info...

ArchiGREEN-HeatPump

Compatible with ArchiCAD 12 and later.

A customizable mechanical heat pump based on popular manufacturers specifications.

Parameters include:

Misc. dimensions (width, depth, height)
MEP connection parameters (for MEP add-on)
2D/3D detail level
Floor plan display modes (symbolic and follow cut plane)
Misc. 2D/3D appearance parameters
Misc. materials
LEED information for listing and calculations
ArchiCAD standard listing parameters

UniCabinet Object Set

Compatible with ArchiCAD 12 and later.

A library of 3 highly-parametric cabinet objects for quick and easy placement of built-in or free-standing cabinetry. Perfect solution for commercial and modern residential projects. No additional ArchiCAD Add-Ons required.

Objects Included:

UniCabinet-Base
UniCabinet-Wall
UniCabinet-Tower

Parameters include:

2D and 3D graphically sizeable ("stretchy")
No. of units (manual input or calculated)
End conditions (finished, connecting, blind corner)
Individual unit options (type, sizing, door/drawer count, etc.)
Misc. dimensions
Misc. hardware options (type, size, placement)
Misc. 2D/3D appearance parameters
Misc. materials
Cabinet count and price listing parameters
ArchiCAD standard listing parameters
Base cabinet includes multiple sink and tap options
Click here for documentation sample.

Drinking Fountains

Compatible with ArchiCAD 12 and later.

A library of miscellaneous commercial barrier free drinking fountains based on popular manufacturers specifications. A "must have" for any commercial project.

Objects Included:

EDF-BF_Oval
EDF-BF_Square
EDF-BF_SurfaceMtd

Parameters include:

3D toggle
Model (single or bi-level)
Mounting height
Wall plate toggle
Cooler toggle
Resolution
Misc. dimensions
Plan symbol appearance parameters
Barrier free clear floor space
Misc. materials
ArchiCAD standard listing parameters

Accessories-Wash

Compatible with ArchiCAD 10 and later.

A library of commercial hand drying accessories based on commercial manufacturers specifications. Objects are fully parametric and can be used as specified or customized.

Objects Included:

TowelDispWasteRcpt-Classic (B-369, B-3699, B-3942, B-3944)
PaperTowelDisp-B262
PaperTowelDisp-B286
PaperTowelHolder-B253
HandDryer-Classic (manual or touchless)

Parameters include:

Mounting height
Toggle for specified dimensions
Model
Length
Width
Height
Misc. dimensions
Plan symbol appearance parameters
Misc. materials
ArchiCAD standard listing parameters

Accessories-Toilet

Compatible with ArchiCAD 10 and later.

A library of commercial toilet accessories based on commercial manufacturers specifications. Objects are fully parametric and can be used as specified or customized.

Objects Included:

ToiletTissueDisp-B272
ToiletTissueDisp-B273 (B-273 and B-2730)
ToiletTissueDisp-B274 (B-274 and B-2740)
ToiletTissueDisp-B2888 (B-2888 and B-3888)
ToiletTissueDisp-B2892 (B-2892 and B-2890)

Parameters include:

Mounting height
Toggle for specified dimensions
Model
Length
Width
Height
Misc. dimensions
Plan symbol appearance parameters
Misc. materials
ArchiCAD standard listing parameters

Accessories-Sanitary

Compatible with ArchiCAD 10 and later.

A library of commercial sanitary napkin accessories based on commercial manufacturers specifications. Objects are fully parametric and can be used as specified or customized.

Objects Included:

SaniNapkinDisp-B254
SaniNapkinDisp-B353 (B-353 and B-35303)
SaniNapkinDisp-B354
SaniNapkinVendor-B2800
SaniNapkinVendor-B3500
SeatCoverDisp-B221
ChangingStation-B2200 (B-2200 and B-2210)
Childseat-B2220

Parameters include:

Mounting height
Toggle for specified dimensions
Model
Length
Width
Height
Misc. dimensions
Plan symbol appearance parameters
Misc. materials
ArchiCAD standard listing parameters

Accessories-Racks

Compatible with ArchiCAD 10 and later.

A library of miscellaneous commercial racks, hooks, and holders based on commercial manufacturers specifications. Objects are fully parametric and can be used as specified or customized.

Objects Included:

MopHolder-B233 (24", 36", 48", 60")
RobeHook-B670 (B-670, B-671, B-672, B-677)
RobeHook-B767 (B-7671, B-7672, B-7677)
TowelBar-B673 (B-673 and B-6737)
TowelBar-B674 (B-674 and B-6747)

Parameters include:

Mounting height
Toggle for specified dimensions
Model
Length
Width
Height
Misc. dimensions
Plan symbol appearance parameters
Misc. materials
ArchiCAD standard listing parameters

Steel Web Joist

Compatible with ArchiCAD 10 and later.

SteelWebJoist-Pitched is a parametric structural steel web joist member for use in commercial construction.

Parameters include:

Graphically sizeable ("stretchy")
Beam depth
Placement/anchor point
Pitch along axis (rise/run, angle, or percentage)
Pitch across axis (rise/run, angle, or percentage)
Chord angle/seat depth
Chord angle thickness
Bar diameter
Top and bottom chord extensions
Multiple plan symbol appearance parameters
Materials
ArchiCAD standard listing parameters

Concrete T-Beam

Compatible with ArchiCAD 10 and later.

A parametric structural element that is based on pre-cast concrete beam construction. This object is versatile and can be pitched in both directions and have any number of tees.

Parameters include:

No. of Tees
Placement point (insertion point reference)
Multiple web dimensions
Multiple flange dimensions
Flange widths at each end
Flange extension
Pitch along axis (rise/run, angle, or percentage)
Pitch across axis (rise/run, angle, or percentage)
Support lug toggles (both ends)
Support lug dimensions
Multiple 2D properties (axis line settings)
Beam and lug materials
2D and 3D graphically sizeable ("stretchy")
ArchiCAD standard listing parameters

Rigid Frame System

Compatible with ArchiCAD 10 and later.

RigidFrame includes 2 parametric structural elements that are based on pre-fabricated rigid frame construction. These objects are versatile and can be used for a multitude of building construction elements.

Objects included:

RigidFrame-EaveStrut
RigidFrame-Beam

Parameters include:

Eave height
Roof pitch (rise/run) (positive and negative)
Axis rotation
Independent base, eave, and peak web depths
Web thickness
Flange thickness
End masking
2D and 3D appearance settings
2D and 3D graphically sizeable ("stretchy")

Wall Panel

Compatible with ArchiCAD 10 and later.

WallPanel is a highly parametric construction element that is a "must" for any project requiring repetitive walls or panels with reveals and/or joints.

Examples for uses: tilt-up wall construction, pre-cast panels, decorative inlay panels.

Parameters include:

Variable wall end heights (pitched)
Wall tilt angle
Sizeable and moveable openings
Equally spaced horizontal and vertical reveals
Total of 16 independently spaced horizontal and vertical reveals
All reveals are independently sizeable (width/height x depth)
Edge reveals, mitering, and masking
2D and 3D appearance settings
Multiple material assignments
2D and 3D graphically sizeable ("stretchy")

ArchiDetail-Steel

Compatible with ArchiCAD 12 and later.

ArchiDetail-Steel is a parametric 2D object Library that helps you to produce fast and accurate structural steel details. Reduce file size and drafting time with these essential structural elements.

Objects included:

Angle
Channel
Pipe
TS shape (Tube)
S shape (I-Beam)
ST shape (I-Beam "T")
W shape (Wide Flange)
WT shape (Wide Flange "T")
Plate
Bent plate
Open web joist
Steel deck

Parameters include:

Graphically sizeable ("stretchy")
Optional ASTM sizing
Misc. dimensions
Fireproofing thickness
Multiple pen color parameters
Multiple fill pattern parameters
Multiple line-type parameters

ArchiDetail-CMU

Compatible with ArchiCAD 10 and later.

ArchiDetail-CMU is a parametric 2D object that helps produce fast and accurate concrete masonry unit sections for plan and section detailing.

Parameters include:

Graphically sizeable ("stretchy")
Block size (4", 6", 8", 12", custom)
Unit Type (stretcher, bond beam, finished end, solid)
Display type (plan or section)
Number of courses/stretchers
Half-length unit
Finished Corner unit
Cell wall thickness
Mortar joint size
Mortar joint profile (flush, concave, raked, "V-groove")
Reinforced cells
Multiple pen color parameters
Multiple line type parameters
Multiple fill pattern parameters

ArchiDetail-Brick

Compatible with ArchiCAD 10 and later.

ArchiDetail-Brick is a parametric 2D object that helps produce fast and accurate brick sections for plan and section detailing.

Parameters include:

Graphically sizeable ("stretchy")
Brick type (modular, king, custom)
Display type (plan or section)
Number of courses/stretchers
Mortar joint size
Mortar joint profile (flush, concave, raked, "V-groove")
Reinforced cells
Multiple pen color parameters
Multiple fill pattern parameters

ArchiDetail-Siding

Compatible with ArchiCAD 10 and later.

ArchiDetail-Siding is a parametric 2D object that helps produce fast and accurate siding and shingle detailing:

Beveled
Shiplap
Simple drop
Board & batten
Tongue & groove

Parameters include:

Graphically sizeable ("stretchy")
Joint/exposure spacing
Lap size
Lap thickness
Finished end at top
Starter strip at bottom
Finished end coarse size
Multiple pen color parameters
Fill pattern
Labeling options

ArchiDetail-Sheathing

Compatible with ArchiCAD 10 and later.

ArchiDetail-Sheathing is a parametric 2D object that helps produce fast and accurate sheathing detailing:

Plywood
Gypsum board
Plaster
Custom

Parameters include:

Graphically sizeable ("stretchy")
Sheathing thickness (standard and custom)
End condition parameters (mitered, square end, none)
Miter angle
Scale factor threshold for poche'
Multiple pen color parameters
Multiple fill pattern parameters